TSE3941 is a one-component, fast curing silicone adhesive sealant. It uses the moisture in the air, curing to form a flexible, flame-retardant silicone rubber. TSE3941 of the metal include copper, plastics, ceramics, glass and other non-corrosive with excellent bonding, both without the use of primer. Key Features ★ flame retardancy by UL94V-1 (File No: E56745) certification ★ non-corrosive to metal, in line with MIL-A-46146B corrosion test standards ★ fast curing, low odor, alcohol released during vulcanization Steam ★ with various substrates without the use of an adhesive primer, excellent heat resistance and cold resistance, from -55 ℃ to 200 ℃ ★ excellent weather resistance, ozone resistance and chemical resistance, excellent electrical ★ insulation system easy to use application component: high-voltage part of the flame-retardant adhesive, to meet the flame retardant in industrial applications, electrical and electronic component mounting a seal sealing the wiring, electrical, electronic and communication equipment waterproof seal Toshiba TSE3941 electronic silicone Size: 300ml / branch, white, cream; thermal sealant, neutral cure, flame retardant, non-corrosive sealant. Fast cure, good adhesion, the United States UL certification, product characteristics: thermal flame retardant used, thermal conductivity 0.83W/MK, UL94V-0. Curing type single-component condensation curing characteristics dealcoholization quick dry, thermal adhesive , UL 94V-1, the U.S. military standard liquidity illiquidity viscosity (23oC) Pa.s - dry time min 5 Density (23oC) g/cm3 1.65 Tensile strength Mpa 2.90 Elongation% 100 Thermal conductivity W / mK 0.83 Volume resistivity MΩ.m 4.0x106 dielectric strength kv / mm 22.0 60Hz 4.0 permittivity dielectric loss factor 60Hz 0.040