TSE382 single component, neutral oxime curing silicone adhesive sealant. Using the moisture in the air at room temperature vulcanizing. The product with many materials, such as metals, plastics, ceramics and glass with good adhesive properties, and without primer. Vulcanized silicone rubber excellent for solar cell module, electronic communications equipment, automotive parts and instrumentation seal. Key Features: * on a variety of substrates without primer * Neutral cure; rarely corrosive * excellent heat resistance and cold resistance; from -55 ° C to 200 ° C continuous operation * excellent weather resistance, ozone resistance and chemical resistance * Excellent electrical insulation properties * Easy to use * one-component systems to choose from a variety of colors: transparent, white * certified by UL (File No.: E56745): TSE382-W White: Through UL746 approved, TI Elec. 150 ° C, Mech. 140 ° C; TSE382-W white and TSE382-C Transparent: meet UL94HB standards. Applications: * Electrical and communications equipment * Instrument waterproof sealant to prevent water and dust intrusion airtight sealant * travel * used windscreen sealant used car engine oil spill prevention sealant * cold and heat and flame sealing and potting equipment * solar cell module frame, the junction box adhesive seal completely effective protection of the silicon wafer is not contaminated, Oxidation of metals, glass, plastics, wood, high-strength adhesive curing typical product data Appearance before TSE382 illiquid paste Tack Time minutes (23 0C) 10 after curing (7 days @ 23 0C / relative humidity 50%) TSE382 weight elastic rubber Appearance (23 0C) 1.04 Hardness (Shore A) 28 Pull Tensile strength MPa {kgf/cm2} 1.9 {19} Elongation% 380 adhesive strength * Mpa {kgf/cm2} 1.7 {17} Dielectric Strength KV / mm 23 Thermal conductivity W / m · K {cal / s · cm · 0C} 0.18 {4.4 × 10-4} resistivity MΩ · m {Ω · cm} 1x107 {1x1015}